8.5 kW Ground Mounted System. $28,170

Qty
Part Number
Description
36
MTPVP-235-MSC Motech 235W PV MODULE USA
2
Classic-150 Classic 150W Charge Controller for solar modules
4
MNPV4-TYCO PV Combiner Box Prewired for Tyco Connectors
18
51-7000-168A Rail, XRS at 168" (14 feet) clear
9
29-7000-204 4-pack, end clamp (G) 1.97", Mill
14
29-7000-108 4-pack, mid clamp (G) 2.5" , Mill
36
29-7001-000 SGA Rail Connector at 3"
10
70-0300-SGA SGA Top Cap at 3"
40
29-4000-001 WEEB Compression Clip
20
29-4000-002 WEEB Grounding log
5
70-0300-CBR SGA 3" Brace Assembly
12
TYCO-50 Home Run Cable 50ft- TYCO
1
WL1000 Electrical Shock Warning label
1
WL2000 Solar Disc Warning label

Motech 235W PV panel (quantity: 36)

Features

motech pv module specs

Motech 235W Spec Sheet

Classic 150 Charge Controller (quantity: 2)

classic 150 charge controller

Features unique only to the MidNite Classic:

PV Combiner Box Prewired for Tyco Connectors (quantity: 4)

mnpv4-tyco

 

Features

tyco solar connectors

XRS Rail at 168" ( 14 Feet ), clear (quantity: 18)

51-7000-16A

The XRS rail is our popular, best performing rail. Spanning over 12 feet
under most load conditions, the XRS rail has slots for both top and
bottom mounting. The XRS rail is manufactured using extruded
6105-T5 aluminum and is available in clear or black anodized finish.
Black finish is special order, call for details.

Item # Description
51-7000-144A XRS, Rail 144" (12 Feet) Clear
51-7000-168A XRS, Rail 168" (14 Feet) Clear
51-7000-192A XRS, Rail 192" (16 Feet) Clear
51-7000-216A XRS, Rail 216" (18 Feet) Clear
51-7000-144B XRS, Rail 144" (12 Feet) Black
51-7000-168B XRS, Rail 168" (14 Feet) Black
51-7000-192B XRS, Rail 192" (16 Feet) Black
51-7000-216B XRS, Rail 216" (18 Feet) Black

4 Pack end clamp (G) 1.97" (quantity: 9)

29-7000-204
Top mounting clamps attach via the slots in the rails and are not
dependent on the module’s mounting holes. The end clamps require
1.5” of rail on each end and vary in height depending on the module
being mounted. Please use sizing charts or online configurator to
determine the correct size of end clamp for your project. Available
also in black anodized finish.
Includes hardware.

4 Pack Mid Clamp (G) 2.5" (quantity: 14)

29-7000-108
Mid clamps are used when top-mounting modules to the top slot of
the XRS and XRL rails. The mid clamps require only .25” between
modules, optimizing the number of modules that can be fit onto a
single pair of rails. Available also in black anodized finish.
Black is special order, call for details

SGA Rail Connector at 3" (quantity: 36)

29-7001-001
The rail connectors secure the XRS rails to the cross pipes. Each XRS
rail requires two connectors to create a secure attachment. Available
for both 2” and 3” sizes, the rail connectors are manufactured using
extruded 6105-T5 aluminum.

SGA Top Cap 3" (quantity: 10)

70-0300-SGA
The heavy duty cast steel top caps secure quickly and easily to the
schedule 40 pipe with 3 set screws. Available in 2” and 3” sizes, the
top cap also supports the cross-rails on top with simple u-bolts. The
top caps are manufactured using cast steel ASTM A216. Schedule 40
pipe not included.

WEEB Compression Clip (quantity: 40)

29-4000-001
Wiley grounding clips (WEEB DMC), grounding lugs, and bonding
jumpers are all available. Order one grounding clip for every two top
mounting clamps, one grounding lug for every rail segment, and one
bonding jumper for every splice.

iron ridge ground array mounting system

 

  hardy solar